Atlas Collection: Dockyard 10 Piece Set with Dockyard Strop & Compound
Atlas Collection: Dockyard 10 Piece Set with Dockyard Strop & Compound
Dockyard 10 Piece Atlas Collection
Introducing our hand picked set for 2023, The Atlas Collection is comprised of 10 of our most popular tools: 5 U-gouge tools, 4 V-tools, & 1 skew tool.
We were inspired by the makers and artists who believed in us as we learned to navigate the world of micro carving tools.
We hand picked these tools for those who dare to chase their vision in 2021. Whether your vision is drawn on paper or still unraveling in your mind, we welcome you to explore the atlas of your imagination with Dockyard Tools.
Dockyard Tools are the original micro carving tools in the wood carving industry. These tools are a must when it comes to detail carving work of any kind.
Dockyard 10 Piece U-Gouge Set includes:
- 1.5 MM U-Gouge
- 2 MM U-Gouge
- 3 MM U-Gouge
- 4 MM U-Gouge
- 5 MM U-Gouge
- 3MM Skew
- 75 Degree MM V-tool
- 1.5 MM V-tool
- 2 MM V-tool
- 3 MM V-tool
-Each tool handle is stamped with the size and tool type for easy detection.
-Overall length is 5 ½ inches.
- ⅜ inch octagonal wood handle is 4 inches long, which makes for an easy to grip tool that won’t roll off your workspace.
-Includes thick, quality, see-thru, storage pouch.
___________________________
Our tools are handcrafted, hand tested, and ready to use.
Craftsmanship: tempered to HRC58 for a durable edge.
Inspection: tested to ensure proper sharpness for a satisfying cutting edge.
We manufacture our handles with America’s renowned Cherry wood, chosen for its lustrous, reddish hue, and immense durability.
Dockyard tools are proudly made in the U.S.A.
Satisfaction Guaranteed:
We take pride in delivering the highest quality tools, with the best American made materials, that our customers can trust in. If you are not 100% satisfied with a tool you receive, please reach out to us using our contact page so we can take care of you.
Word of Caution:
Handle tools with care. Dockyard Tools are sharp. Please consider wearing appropriate safety equipment when handling.
Dockyard Strop & Compound
Keep your Dockyard tools sharp with the Dockyard Gouge and V Tool Strop from The Carving Glove Guy!
This strop offers a convenient way to maintain a tool edge while you carve. When charged with compound, its multiple profiles (5 MM, 4 MM, 3 MM, 2 MM, 1.5 MM Gouge, and 75° , 90° V angles) make it easy to quickly hone the inside face of a gouge or V-tool.
Compact, it is about 5-1/2" x 3" and comes with a 2 oz container of honing compound.
Made in the USA.
Includes:
- Wooden strop
- 2oz strop compound
- Small brush
- 4-1/2 x 9-1/2 denim velcro storage pouch
Directions for use:
- Apply compound to the raised and depressed portion of the strop for each size tool you would like to sharpen. Remember, you are sharpening your tools with the compound not the wood. The wood is simply the carrier for the compound.
- The strop is designed so that the compound can sharpen both the inside (remove burs) and the outside of the tool. To sharpen the inside and remove burs on the tool you must pull the tool (trailing the sharp edge) along the raised section so that the compound is able to polish and remove burs along that edge.
- To sharpen the outside of GOUGES: Raise the handle up to make approximately a 20 degree angle with the grove in the strop. This will position the cutting edge against the compound. Rotate the cutting edge as you pull it down the grove to contact all points on the cutting surface.
- To sharpen the outside of V TOOLS: Use the flat bottom grove at the end of the strop. Sharpen one side at a time. Position the handle at a 20 degree angle so the cutting surface on one side of the V tool can contact the compound in the flat grove. With the tool in that position (20 degrees up from the grove) pull the tool the length of the grove. This will sharpen one side of the V tool. Repeat for the other side.
Includes sharpening compound. Replacement compound available separately.